Worcraft PROFESSIONAL GC22-16E, Инструкция по эксплуатации

Страница: 66 / 74

ELECTRIC ROUTER
INTENDED USE
The power tool is intended for sawing wood such as wooden beams, planks, branches, tree trunks, etc., and for sawing of trees.
Cuts can be sawed with or across the grain. This power tool is not suitable for sawing mineral materials.
TECHNICAL SPECIFICATIONS
Model GC22-16E
Voltage 230-240V~ 50Hz Saw chain division 3/8
”
Rated power 2200W Drive link thickness 1.27mm
Spindle speed 8000/min Teeth quantities
Bar size
406mm
（
16inch
）
Oil tank 0.28L
Cutting length 395mm
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Read the manual.
Wear ear protection.
Wear eye protection Wear breathing protection
Do not expose to rain. Use the device with both hands.
Electrical appliances must not be
disposed of with the domestic waste. Protection class II
PRODUCT ELEMENTS
1 Rear grip 10 Claw stop
2 Front grip 11 Safety lock- button
3 Front finger guard / Chain break 12 Cable hook
4 Saw chain 13 ON/OFF switch
5 SDS system 14 Oil tank cap
6 Guide bar cover 15 Oil gauge
7 Guide bar 16 Chain wheel
8 Rear finger guard 17 Guide bolt
9 Power cable
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
●
Keep work area clean and well lit. Cluttered or dark