24
Working with the main menu
Sense ll – 6 720 812 775 (2014/10)
Call up the menu for renaming a heating circuit
▶ If the standard display is active, press the menu key briefly to open or close the main
menu.
▶ Turn the selector to highlight
Heating
.
▶ Press the selector to open the
Heating
menu.
▶ Turn the selector to highlight
Rename heating circuit
(only available if two or more
heating circuits are installed).
▶ Press the selector.
The cursor flashes to indicate the start position for data input. The names of the
heating circuits are assigned by default.
Enter and insert characters
▶ Turn the selector to move the cursor to the position where a character is to be
entered.
▶ Press the selector to activate the input field to the right of the cursor.
▶ Turn the selector to select a character.
▶ Press the selector to enter the selected character.
The selected character is entered. The input field for the next character in the text is
enabled.
▶ Turn the selector to enter more characters.
▶ Press the Back key when you have finished making entries.
The cursor flashes to the right of the character entered. The controller operates with
the modified settings.
Delete characters/Delete entire name
▶ Turn the selector to position the cursor after the letters to be deleted.
▶ Press the selector to activate the input field to the right of the cursor.
▶ Turn the selector until
<C
is displayed.
▶ Press the selector to delete the character to the left of the enabled input field
(<C
remains active).
▶ Press the selector again to delete more characters or press the Back key to exit the
process.
The cursor flashes in the place where the character
<C
was previously located.
▶ Press the Back key to exit the input process and to use the entered name.
Operating the appliance
Result
Table 18 Rename heating circuit
6 720 815 237-36.1O
6 720 815 237-37.1O
6 720 815 237-38.1O