ESC J n
[Name]
Print and feed paper.
[Format]
ASCII
ESC
J
n
HEX
1B
4A
n
Decimal
27
74
n
[Range]
0 <= n <= 255
[Description]
Prints the data in the print buffer and feeds the paper [n x vertical or
horizontal motion unit] inches.
[Notes]
1) After printing is completed, this command sets the print starting
position to the beginning of the line.
2) The paper feed amount set by this command does not affect the
values set by ESC 2 or ESC 3.
3) The horizontal and vertical motion unit are specified by GS P.
4) The GS P command can change the vertical (and horizontal)
motion unit.
However, the value cannot be less than the minimum vertical
movement amount, and it must be in even units of the minimum
vertical movement amount.
5) In standard mode, the printer uses the vertical motion unit (y).
6) In page mode, this command functions as follows, depending on
the starting position of the printable area;
When the starting position is set to the upper left or lower right of
the printable area using ESC T, the vertical motion unit(y) is used
When the starting position is set to the upper right or lower left of
the printable area using ESC T, the horizontal motion unit(x) is
used.
7) The maximum line spacing is 1016mm (40inches). When the
setting value exceeds the maximum, it is converted to the
maximum automatically.
[Reference]
GS P
