WOOSIM PORTI-P, Руководство оператора

Страница: 22 / 35

Porti-P Rev. 5.0
http://www.woosim.com
2012-05-21
22
u
When you press
FEED Button
once again, Power Lamp flickers 3 times
and the Error Lamp flickers twice.
® Press MODE Button once, Error Lamp flickers once.
And then Data Bit has set to 7 data bit.
u
When you press FEED Button once again, Power Lamp flickers 4 times
and the Error Lamp flickers once.
® Press MODE Button twice, Error Lamp flickers 3 times.
And then the Parity bit has set to Odd parity bit .
u
When you press FEED Button once again, Power Lamp flickers 5 times
and Error Lamp flickers once.
® Press MODE Button twice, Error Lamp flickers 3 times.
And then the density has set to Density high .
u
When you press
FEED Button
twice, Power Lamp flickers 7 times
and Error Lamp flickers twice.
® Press
MODE Button
once, Error Lamp flickers twice.
And then the mark has set to Marm no use .
u
When you press FEED Button once again, Power Lamp flickers 8 times
and Error Lamp flickers once.
® Press MODE Button once, Error Lamp flickers twice.
And then the sensor has set to Sensor medium1 .
If all the mode have set, press the MODE Button and the FEED Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
( PARALLEL / 57,600 baud / 7 data bit / Odd parity / Density high / Mark no use
/ Sensor
m
edium1 )
If the status is not correct, please try it again according to the procedure.