18
Fitting/Operating the lights:
The front light is already fitted, to operate the this light, simply press the button on the top of the light to
cycle through the modes which are: On, Flashing and Off.
If your light doesn’t work initially, it is likely that the insulating material fitted at the factory to stop the bat-
tery going flat is still in place. Simply pull the external tag to remove it, or if necessary, access the battery
compartment and remove the small plastic insulator that sits between the battery and terminal of the light.
The rear light is supplied but will need to be fitted. It attaches to the seat-post as shown.
The button to operate the rear light is on the
back side of the unit. Press the button to switch
the light on/off and to cycle through the various
modes.
