1 – Charging the Battery
The battery may not leave us fully charged.
You should
fully charge the battery before initial use
. The battery can
be charged on the bike or it can be removed and charged
separately. The socket used to charge the battery is located
under the handle at the rear of the battery as shown below.
Ensure that the charger AND also the battery are
switched off before attaching the charger to the bike.
To
turn the battery on/off use the green switch on the underside
of the battery as shown. You should keep the battery topped
up to get the best out of it.
To charge the battery, simply connect the charger to the
socket and plug the other end into a regular mains socket.
On the charger is a small light which is red while charging.
When charging is complete, this light will turn green.
The battery can be removed from the bike and charged in a
convenient location such as home or office when the bike is
not in use. To remove the battery from your electric bike, use
the supplied key to unlock the battery by turning it anti-
clockwise. Once unlocked, slide the battery from the bike
using the handle at the rear of the battery.
An initial full charge may vary from 30 minutes to as much as
10 hours.
12-Control Module—Advanced
The control module has many advanced features and
modes, these include back-lit display (for night riding), indi-
cator options for max speed, average speed and current
speed, a digital clock and a battery power indicator. It also
features a walking mode which is used when you want to
wheel/push the bike, this is basically a very low speed mode
which is activated by pressing and holding the button marker
with a ‘down-arrow’.
2.
3.
1.
5.
4.
1.
Battery Level Indicator
2.
Assistance Level (Pedal Assist)
3.
Odometer
4.
Digital Clock
5.
Speed Indicator
