3
Hints and Tips
The information below is to help with common issues you may encounter during/after installation.
Error Codes and what they mean:
06 E
—you have a throttle that has an enable/disable button. The kit expects a twist-grip to be present and
if it is disabled, it will show the error code. The bike will continue to work like this, but the error code will
not clear until the twist-grip is enabled (by pressing in the red button). This issue does not occur with the
thumb-throttle as it always on and cannot be turned off.
05 E
—this error occurs if one of the brake levers is pulled while powering up the bike. Simply release the
brake lever and this error will clear.
Chain-ring not lining up correctly with rear cassette or freewheel:
If you find that you have this issue, we can supply a washer which will help to bring it into line, just give us
a call and we’ll get one sent out for you. They are £1 plus postage. You will need one of these if your chain
keeps coming off and/or you cannot select all of your gears. See the section of this manual entitled
“Installing the motor” for more details and a photo showing where the washer is fitted.
