Woolly Mammoth WM 5, Руководство пользователя

Страница: 7 / 29

Woolly Mammoth Stoves 2016/GB Issue 5 20/10/17
7
Basic Operation
Your Woolly Mammoth stove comes equipped with 3 Main controls:
Secondary Air Control (A) – This works on a push-pull slider system and controls the flow of
secondary air into the stove. This air allows the stove burn to be controlled at a lower burn rate, as
well as the air wash that keeps the glass clean.
Primary Air control (B ) – The main air control, used predominantly during start-up/lighting of
your stove. This works on a push-pull slider system
Riddler Control (C) – This is the control for the riddling grate. This works on a push-pull slider
system
Lighting Your Woolly Mammoth Stove
Your new Woolly Mammoth stove is fitted as standard with an adjustable primary air intake
controlled by the slider at the base of the model, an adjustable secondary air intake positioned to
the side at the top of the burner (which also controls the air wash system) and a pre-adjusted
tertiary air intake for complete combustion of all fuels. The air supplied via the primary air intake is
drawn from the front of the stove and the air supplied via the secondary air intake, air wash
system and tertiary air is drawn from the rear of the stove. Air is drawn into the rear of the stove
and heated along the entire depth of the fire box to create an effective air wash system for crystal
clear glass.
1. Check that both the primary and secondary air intakes are in the open position