2.3.9 Stability System
This system is for stabilizing the harness in flight. The pilot can activate the stability system by pulling the two little red spheres located near the karabiners
and deactivate it with the metal trim. It is also possible to climb in thermals with the stability system on but the harness will not move as smoothly; to have a
more dynamic harness deactivate the stability system with the metal trim inside the turn or even both metal trims.
The small plastic trims located near the automatic buckles are for pre-adjusting the system according to the chest strap width.
2.3.10 Extractable headrest
This is for neck comfort especially during long cross flights. To ensure maximum head motion, the headrest must not be used during take off, and it should
only be extracted once airborne, by pulling on the small strap behind the neck area whilst simultaneously leaning forward.
The headrest can be pushed back in during flight by leaning forwards whilst pushing it back into place. We suggest you retract the headrest before landing.
The small black buckle located behind the headrest is the tilt adjustment: if the headrest is lowered, it becomes more vertical; if it is raised, it tilts
backwards.
26
