2.2.3- Inserting the front emergency parachute
Fasten the emergency parachute bridle using the two Velcro strips inside the parachute container, ensuring that the two loops leading to the main
karabiners are on opposite sides and emerge from the cockpit symmetrically, therefore with the same length. These two loops also make it possible to
adjust the height of the container. We recommend fastening the Velcro as shown in the photo, in other words with the edge at the extremity of the
container. If this is not satisfactory, remove the emergency parachute and repeat the steps as described below.
Then carefully arrange the bridle inside the container.
Insert the parachute into the harness container so that the deployment handle is visible and facing outwards, and with the loop that connects the handle to
the deployment bag facing upwards. Thread a thin cord (such as a paraglider line) into each elastic loop. This will make it easier to close the container.
Insert the elastic loops into the smaller grommets (smaller with respect to the others on the edge of the container). Close the flaps in the order shown in the
drawings/photos below.
14
