Wanì 3 - user manual
12
ENG
2.1.3 - Adjustable volume parachute container
WANì 3 has the ability to vary the volume of the parachute container, to
adapt to the size of the various reserve parachutes on the market. This is
possible by means of a zipper found inside the container.
Remember to carefully position the zipper tabs inside the small protection
pockets located at the two ends of the zipper itself, in the fully open or
fully closed position.
2.1.4 - Inserting the reserve parachute
Insert the parachute in the harness container with the handle visible
toward the outside and with the handle coupling loop to the float bag fa
-
cing upward. Immediately position the handle in its specific housing.
Introduce a thin rope (like paraglider line) into each elastic loop which you
will use to help close the container. Insert the elastic loops into the smal-
lest of the eyelets, marked with number 1.
Take the bridle cover zipper tab all the way to the right, then partially close
it, moving the zipper about 10 cm to the left.
Then start to close both parachute container flaps, following the nume
-
rical progression and/or the sequence in the photographs. taking care
during this phase that the zip does not open back up at the right end.
