Wanì 3 - user manual
11
ENG
Third system: (suitable for steerable or non-steerable parachutes with
double connection point)
If you are using a reserve parachute with directional control and dual bri-
dle, or if your reserve parachute has a double-riser bridle, it can be con-
nected to the harness using the two loops positioned at the base of the
harness bridle, near the padded shoulder straps. In this case, the harness’s
reserve parachute bridle will not be used, and so it should be folded, faste-
ned using two elastic bands, and positioned under the cover behind the
pilot’s neck.
The two connections should be made using screw-lock karabiners with a
breaking strength of at least 1,400 kg. In any case, it is important to verify
that the length of the bridle is sufficient to position the reserve parachute
inside the harness pocket, and that there is sufficient play to enable the
parachute to be taken out of the pocket without causing the reserve para-
chute deployment bag itself to open during extraction.
ATTENTION:
To prevent anomalous lateral loads, the bridle should be attached to both
the loops on the shoulder straps. Not to just one of them.
