Woodward EGCP-2 to easYgen-3200XT, Инструкция по эксплуатации

Страница: 2 / 10

37630 easYgen-3000XT Flash Instruction
w w w . w o o d w a r d . c o m
2
PRECONDITIONS
The following conditions are mandatory BEFORE updating a device:
 PC or laptop computer with the latest version of Woodward software ToolKit installed
 Get the latest version
here
 Appropriate configuration files installed/copied on your computer
 Powered up easYgen-3000XT (12/24 V) but

without any(!) genset control operation

without communicating to other devices
 PC or laptop computer connected to the device via the preferred interface type and cable
 Current version of update file *.scp, according to the actual device and the preferred interface.

Get the latest version
here
There are two possible ways to update the easYgen-3000XT:

via USB interface

via Ethernet interface
We recommend using the Ethernet variant for the update procedure.
Depending on the way, you want to conduct the update you may receive an appropriate file:

File for USB:
“…usb.scp”.

File for Ethernet:
“…eth.scp”.
For each interface, it is mandatory to use the appropriate file!
Released