Products:
Genset Controllers
Device Series: easYgen-3000XT
Devices:
easYgen-3100XT/3200XT/3400XT/3500XT
37630 easYgen-3000XT Flash Instruction
w w w . w o o d w a r d . c o m
1
EASYGEN-3000XT FLASH INSTRUCTION #37630
Flashing a Woodward easYgen-3000XT device for full or partial update
For trained personnel only!
Updating the device software needs expert level. Otherwise, the device
can become unusable or even cause error function that can lead into
dangerous situation with genset.
DO NOT switch off the device
until the flash procedure is explicitly mentioned as
completely finished as described below
If the device to be updated is installed into a running genset system, it
is mandatory that a genset control expert guarantees trouble free
system setup during update process.
If firmware update process is however interrupted before it has finished,
due to lost or switched off power supply, your device may be no longer
able to operate.
Note that you perform firmware update at your own risk.
What to do?
The updating process comes with conditions, which need certain preparations, ask for step-by-step procedure,
and will be closed with some final preparations.
First, read this instruction manual completely and carefully, before you start updating your device.
Released
