Woodward easYlite-200, Руководство пользователя, Страница: 18 / 34

If the gasket is damaged, it needs to be replaced.
Use only the original gasket kit (P/N 3050-1057)
for replacement.
3.2 Terminal allocation
The rear panel of easYlite-200 with its terminals can be seen in
Fig. 4 below:
Fig. 4: easYlite-200, rear side view
No. Function Cable
Size
Description
1 DC input
B-
2.5mm 2
DC power supply negative input.
2 DC input
B+
2.5mm 2
DC power supply positive input.
3 GND
0.5mm 2
Modbus RS-485.
Connect the RS-485 port to RS-485 port of easYgen
series controllers. It is recommended to use a shield
with the impedance of 120 Ω, with one end
grounded. The terminal provides resistance of 120 Ω;
if needed, short-circuit terminals 3, 4.
4 A (+)
5 B (-)
6 GND
0.5mm 2
CAN bus.
7 CAN (L)
Installation
Terminal allocation
37903A easYgen Expansion Module | LED Lamp Expansion Module 18