Woodward APECS DPG-2101-001 Скачать руководство пользователя страница 25

Страница: 25 / 50

Manual 36526A

DPG-21XX-00X Digital Controllers

Woodward

Chapter 4.

Universal PST

Introduction

The Universal Parameter Setup Tool (Universal PST) is a Microsoft® Windows®

application available from Woodward that enables you to adjust controller parameter

settings and monitor controller operation. Universal PST also includes a graphical chart

recorder that displays engine speed in real-time. This provides a visual representation

of how the engine speed changes in response to changes in load, which can be very

helpful when tuning the controller.

This chapter provides the information needed to use a computer with your controller.

Here you will find instructions for acquiring, installing, and running the Universal PST

on your PC. Also described is information for obtaining or constructing the

communications cable needed to connect the controller’s COMM port to your

computer’s serial port.

Features

Universal PST features include:

•

Automatic configuration to each DPG when communications are established

•

Read/write access to all DPG programmable parameters and features

•

View each parameter's default, minimum, and maximum values

•

Diagnostics utilizing automatic refresh of DPG status

•

Save and open DPG setup data information to and from a file for reuse

•

Single button read to get the current values of all parameters

•

Single button write to program a DPG with previously saved setup values

•

Engine speed monitoring via a chart recorder to aid in tuning the controller

•

Saving chart recorder data to a Microsoft Excel compatible file

•

Help information on each of the controller’s parameters

•

Help information on using the Universal PST

System Requirements

Universal PST minimum system requirements:

•

Pentium® 133 MHz PC

•

50 MB of hard disk space

•

64 MB of RAM

•

Display resolution set to SVGA (800x600) or higher

•

Windows® 98se, NT 4.0, 2000, and XP or greater

•

Windows® 95 or ME not supported

Содержание APECS DPG-2101-001



















































Результаты поиска

Содержание APECS DPG-2101-001

Отзывы:

Woodward APECS DPG-2101-001, Руководство пользователя, Страница: 25 / 50

Результаты поиска

Содержание APECS DPG-2101-001

Отзывы: