16
MAINTENANCE
-
For constant performance, periodically shake out filter bag vigorously. Between clean-
ings, beating the bag with the hand several times is sufficient.
-
The appliance should be cleaned every time the shavings bag is changed.
-
Regularly inspect the filter for damage. Replace damaged filters.
-
Check tightness of the casing and of the sealing of filter and shavings bag regularly.
Electrical and electronic equipment must not be disposed of with household waste. Instead, hand
it over to a designated collection point for recycling. Contact your local authorities or retailer for
further information.
Copyright © 2016 Isojoen Konehalli Oy. All rights reserved. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the written
permission of Isojoen Konehalli Oy is prohibited. The content of this document is provided "as is". Except as required by applicable law, no express nor implied warranties of any kind,
including the warranties of merchantability and suitability for a particular purpose, are made in relation to the accuracy, reliability or content of this document. Pictures in this document
are indicative and may differ from the delivered product. Isojoen Konehalli Oy follows a policy of ongoing development and reserves the right to make changes and improvements to the
product and this document without prior notice. EU Declaration of Conformity is not anymore valid and the warranty is voided if the technical features or other features of the product
are changed without manufacturer’s permission. Isojoen Konehalli Oy is not responsible for the direct or indirect damages caused by the use of the product.
EU Declaration of Conformity
(Translation of the original EU Declaration of Conformity)
We
Isojoen Konehalli Oy
Keskustie 26, 61850 Kauhajoki As, Tel. +358 (0)20 1323 232, [email protected]
declare under our sole responsibility that the following product
Equipment: Dust collector
Brand name: Woodtec
Model/type: XW117 (JFD550)
is in conformity with the
Machinery Directive (MD) 2006/42/EC, Low Voltage Directive (LVD)
2014/35/EU
,
Electromagnetic Compatibility Directive (EMC)
2014/30/EU
and the following harmonized standards and technical specifications have been applied:
EN 55014-1/A1:2009, EN 61000-3-2/A2:2009, EN 61000-3-3:2008, EN 55014-2/A2:2008, EN 60335-1/A14:2010, EN
60335-2-69:2009, EN 62233:2008
The last two digits of the year in which the CE marking was affixed: 16
Kauhajoki 15.1.2016
Manufacturer
:
Isojoen Konehalli Oy
________________________
Harri Altis, Purchase Manager (authorized to compile the Technical File)
