Woodstock SHOP FOX M1011, Инструкция по эксплуатации

Страница: 9 / 16

SETUP
-7-
M1011 24" Pan and Box Brake
• Workbench Load:
Make sure that your workbench is
strong enough to support the pan and box brake and
the work pieces that will be bent. The workbench
should not move when you are bending sheet metal.
• Working Clearances:
Consider existing and
anticipated needs, size of material to be processed
through the tool, and the space needed for auxiliary
stands, work tables or other machinery when
establishing a location for your pan and box brake.
• Lighting:
Lighting should be bright enough to
eliminate shadow and prevent eye strain.
MAKE your shop “child safe.” Ensure
that your workplace is inaccessible to
youngsters by closing and locking all
entrances when you are away. NEVER
allow untrained visitors in your shop
when assembling, adjusting or operat-
ing equipment.
Tool Placement
Mounting
A securely mounted pan and box brake gives you a bet-
ter feel for the amount of sheet metal "spring back"
and give you excellent control during the bending pro-
cess.
To mount the pan and box brake, do these steps:
1.
Mount the Model M1011 to a flat and level work
surface, which is solid enough to hold the pan and
box brake and the work material.
2.
Place the pan and box brake onto the work sur-
face and make sure there is adequate work room
on all sides.
3.
Use a pen or pencil to transfer the hole locations
to the mounting surface.
4. Drill four
3
/
8
" diameter holes in the work surface.
5.
Mount the pan and box brake to the work surface
using
5
/
16
" bolts, washers, and nuts.