Woodstock SHOP FOX M1011, Инструкция по эксплуатации

Страница: 8 / 16

-6-
SETUP
M1011 24" Pan and Box Brake
The
SHOP FOX
®
Model M1011 has been carefully pack-
aged for safe transporting. If you notice the machine has
been damaged, please contact Woodstock International
Technical Support at 1-360-734-3482 or send e-mail to:
tech-support@shopfox.biz
READ and understand this entire instruc-
tion manual before using this tool.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!
Unpacking
SET UP
The following is a list of the parts components shipped
with the
SHOP FOX
®
Model M1011.
Box Contents:
A. Lever ........................................................1
B. Hex Wrench (6 mm) .......................................1
C. 24" Pan and Box Brake ....................................1
D. 1" Fingers ...................................................2
E. 2" Fingers ...................................................4
F. 3" Fingers ...................................................2
G. 4" Fingers ...................................................2
Should any part be missing, examine the packaging
carefully to be sure those parts are not among the
packing materials. If any parts are missing, find the
part number in the back of this manual and contact
Woodstock International, Inc. at 360-734-3482 or at tech-
support@shopfox.biz
Inventory
1. Remove the fingers from the pan and box brake.
2.
Clean the protective coating from machine surfaces
and fingers.
Note
: Use a mild solvent and soft rag.
Harsh solvents like thinners, gasoline, acetone etc.
will damage painted surfaces and can permanently
etch metal surfaces
3.
Place a light coat of machine oil on all machined sur-
faces to prevent rust.
SUFFOCATION HAZARD!
Immediately discard all plastic bags
and packing materials to eliminate
a choking and suffocation hazard
for children and animals.
Cleaning