ADJUSTMENTS
Figure 21.
Maximum board thicknesses.
Figure 22.
Gas spring positions.
Gas Spring Locations
The gas spring can be positioned in 1 of 3 loca-
tions to allow clearance for different board
thicknesses or to mortise a board on edge. To
determine which setting to use, look at the
chart in
Figure 21
and find the board thickness
that most closely fits your workpiece. Note the
number that corresponds with that board. This
will be the position number shown in
Figure 22.
Follow the instructions on the following page to
place the gas spring in the new location.
-16-
ADJUSTMENTS
2
1
3
