Woodstar lv 100, Руководство по эксплуатации

Страница: 19 / 60

19
Setting the table height, Fig. 8
Upper table position for logs up to 59 cm,
centre table position for logs up to 79 cm,
lower table position for logs up to 107 cm.
Note: When using the splitting cross, the clearance is re-
duced by 2 cm.
s 2ELEASETHELOCKINGHOOKS
s 0ULLTHETABLEOUT
s &ITTHETABLEINAPOSITIONNEARTHELOGLENGTH
s 3ECURETHETABLEWITHTHELOCKINGHOOKS
Functional test
Test the function before every use.
Action: Result:
Push both handles towards below. Splitting knife goes
down to approx. 10 cm
above the table.
Let one handle loose, then the
other. Splitting knife stops in
the desired position.
Let both handles loose. Splitting knife returns to
upper position.
Check the oil level before every use – see chapter “Mainte-
nance“.
Splitting
s 0LACETHELOGONTHETABLEHOLDITWITHBOTHHANDLES
press the handles down. As soon as the splitting knife
enters the wood, push the handles down and to the
outside at the same time. This prevents the wood from
putting pressure on the holder plates.
s /NLYSPLITSTRAIGHTCUTLOGS
s 3PLITTHELOGSINVERTICALPOSITION
s .EVERSPLITINHORIZONTALPOSITIONORACROSS
s 7EARPROTECTIVEGLOVESWHENSPLITTING
Rational working method
- Upper position approx. 5 cm above log.
- Lower position approx. 10 cm above table.
Putting into operation
Make sure the machine is completely and expertly assem-
bled. Check before every use:
s 4HECONNECTIONCABLESFORANYDEFECTIVESPOTSCRACKS
cuts etc.).
s 4HEMACHINEFORANYPOSSIBLEDAMAGE
s 4HElRMSEATOFALLBOLTS
s 4HEHYDRAULICSYSTEMFORLEAKAGE
s 4HEOILLEVEL
Venting, Fig. 9
"EFORE WORKING WITH THE LOG SPLITTER VENT THE HYDRAULIC
system.
s 2ELEASETHEVENTINGCAP!BYAFEWREVOLUTIONSSOTHE
air can escape from the oil tank.
s ,EAVETHECAPOPENDURINGTHEOPERATION