Woodstar 3903803903, Перевод оригинального руководства пользователя

Страница: 17 / 36

GB | 17
In addition to the safety requirements in these oper -
ating instructions and your country’s applicable regu -
lations, you should observe the generally recognized
technical rules concerning the operation of wood -
working machines.
Unpacking
• Open the packaging and remove the device care -
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans -
port damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
2. lntended use
The intended use of this power tool is the sanding of
large areas of drywalls as a preparation before paint -
ing or wallpapering using suitable abrasive sheets.
This power tool is neither suited for the preparation
of small areas, corners and edges, nor for the re-
moval of wallpaper and the grinding of ceilings and
wet grinding.
Do not use the power tool for cutting or roughing or
polishing. Do not use it together with wire brushes.
Do not treat asbestos containing materials with this
power tool.
Please note that our equipment has not been de -
signed for use in commercial, trade or industrial ap -
plications. Our warranty will be voided if the machine
is used in commercial, trade or industrial businesses
or for equivalent purposes.
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu -
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in -
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord -
ance with the recommendations.
The operating instructions contain important infor -
mation on how to operate the machine safely, pro -
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in -
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula -
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con -
cerning the operation of the machine and who are in -
formed about the associated dangers. The minimum
age requirement must be complied with.