
INSTALLATION, OPERATION & MAINTENANCE
INSTALLATION, OPERATION & MAINTENANCE
INSTALLATION, OPERATION & MAINTENANCE
INSTALLATION, OPERATION & MAINTENANCE
Woodson Contact Toaster –W.GPC61SC
Tel: 1300 79 1954 Web: www.stoddart.com.au Email: [email protected]
Page 9 of 23
Due to continuous product research and development, the information contained herein is subject to change without notice
Setting Up
Handling
•
Use suitable means to move the appliance: e.g. a lift truck or fork pallet trucks (the forks should
reach more than halfway beneath the appliance).
Site Preparation
•
Ensure the site is level and properly cleaned.
•
The toaster is to be placed on a suitable bench or worktop, at a comfortable working height. (850mm –
900mm)
•
Ensure the contact toaster is placed on a level, stable work surface, away from other heat, water or grease
emitting devices.
Unpacking
•
Check the machine for damage or missing parts before and after unpacking. Report any problems
to either the distributor or manufacturer.
•
Wear protective gloves to unpack the appliance from the box.
•
The unit is supplied fully assembled.
•
Unpack and visually inspect the unit for damage or missing parts. Report any problems to the
distributor or manufacturer.
•
Remove all protective plastic film, tapes, ties and packers before installing and operating. Clean off
any glue residue left over from the protective plastic film.
•
Wipe all surfaces with a clean, sanitised cloth.
First Time Operation
•
Read the complete instruction manual before proceeding.
•
The toaster is preset in the factory with the following settings:
o
Cooking temperature 205- 210 degrees C
o
Standby 150 degrees C
o
The timers are set to 12 seconds each
o
Refer to “Section 6 Setting the timers”
•
Ensure the electrical cable is not damaged and does not hang over the counter, and ensure the
“ON/OFF”
button is set to the
“OFF”
position.
•
Plug the unit into the correct size power outlet.
•
Your toaster is now ready to use.