Woods BSM72, Руководство оператора

Страница: 6 / 22

6 Safety
GB&HB Box Blade SR (Rev. 3/28/2005)

Watch for hidden hazards on the terrain during
operation.
 Stop power unit and equipment immediately
upon striking an obstruction. Turn off engine,
remove key, inspect, and repair any damage before
resuming operation.
 Do not allow bystanders within 25 feet of the
area when operating, attaching, removing, assem-
bling, or servicing equipment.
 Do not allow bystanders within 25 feet of the
area when operating, attaching, removing, assem-
bling, or servicing equipment.
 Do not operate box scraper at speeds above 5
mph.
MAINTENANCE
 Before performing any service or maintenance,
lower attachment to ground, turn off engine, set
parking brake, and remove key.
 NEVER GO UNDERNEATH EQUIPMENT. Never
place any part of the body underneath equipment
or between moveable parts even when the engine
has been turned off. Hydraulic system leak-down,
hydraulic system failures, mechanical failures, or
movement of control levers can cause equipment
to drop or rotate unexpectedly and cause severe
injury or death.
• Service work does not require going under-
neath.
• Read Operator's Manual for service instruc-
tions or have service performed by a qualified
dealer.

Always wear relatively tight and belted clothing
to avoid getting caught in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hair, hands, hearing, and head;
and respirator or filter mask where appropriate.

Make sure attachment is properly secured,
adjusted, and in good operating condition.

Do not modify or alter or permit anyone else to
modify or alter the equipment or any of its compo-
nents in any way.

Never perform service or maintenance with
engine running.

Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.

Eye protection must be used when removing or
installing scarifier shank clips.

Tighten all bolts, nuts, and screws to torque
chart specifications. Check that all cotter pins are
installed securely to ensure equipment is in a safe
condition before putting unit into service.

Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section for
location.)
STORAGE
 Block equipment securely for storage.
 Keep children and bystanders away from stor-
age area.
 Lock scarifier bar in lowered position for stor-
age.

SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!