WOOD'S POWR-GRIP P110(C)04DC(3), Инструкции по преобразованию

Страница: 8 / 20

P1/P2 Conversion: #35116 Rev 4.0/7-20 6
ASSEMBLY
1) Remove all lifter restraints and save them with the shipping container(s) for future use.
2) Select hoisting equipment (crane and hoist, when applicable) rated to carry the
Maximum Load Capacity plus the Lifter Weight for the model you are assembling (see
“SPECIFICATIONS” on page 2).
Note: Any application of the lifter must conform to all statutory or regulatory standards
that relate to the hoisting equipment when used in its geographical location.
T
O
A
SSEMBLE OR
D
ISASSEMBLE
P1-04DC(3) L
IFTER
1)
1A
Adjust the lift point to optimize the lifter's
hang angle:
1.1) Remove the retaining bolt and loosen the
pivot bolt (fig. 1A).
1.2) Move the lift point to the appropriate
position.
1
1.3) Reinstall the retaining bolt and tighten
both bolts securely.
2)
2A 2B
Attach the hoisting hook to the lift point (fig.
2A).
Make sure hook has restraining
latch (see arrow in fig. 2B).
2C
Use rigging (fig. 2C) as needed to make sure the hook does not
interfere with the load.
Only use rigging rated for Maximum Load Capacity plus
Lifter Weight.
1..... Moving the lift point forward (away from operator) helps keep the hang angle vertical while the lifter is loaded ; moving the lift point rearward
(towards operator) helps keep the hang angle vertical while the lifter is unloaded .