WOOD'S POWR-GRIP MRTALPCH610CDC3O, Руководство по эксплуатации, Страница: 10 / 48

MRTALPCH6-DC3(RC): #35125 Rev 1.0/12-19 8
4.3)
Make sure
hook has
restraining latch
(circled).
4D 4E 4F
Only use rigging rated
for Maximum Load
Capacity plus Lifter Weight.
Attach the hoisting hook to the lift point (fig. 4D-E).
Note: Use rigging (fig. 4F) as needed to make sure the
hook does not interfere with the load.
4.4) Use the hoisting equipment to remove the lifter
from the shipping container. Avoid damaging the vacuum pads.
5A
5C
5B
5D
6A
5) Connect the electrical connectors (figs. 5A-B and figs. 5C-D) and install the 9-volt battery
for the notification buzzer as directed in “N
OTIFICATION
B
UZZER
B
ATTERY
R
EPLACEMENT
” on
page 37.
6) Assemble the pad frame for optimal load support (see “T
O
C
HANGE THE
P
AD
F
RAME
C
ONFIGURATION
” on page 9). If applicable, remove the pad covers (fig. 6A) and save them
for future use.
7) Perform tests as required under “T
ESTING
” on page 31.
ASSEMBLY