WOOD'S POWR-GRIP MRTALPCH610CDC3O, Руководство по эксплуатации

Страница: 26 / 48

MRTALPCH6-DC3(RC): #35125 Rev 1.0/12-19 24
T
O
R
OTATE THE
L
OAD
Make sure load is positioned correctly on lifter (as previously
directed).
Never disengage rotation and tilt latches at the same time, because this could result
in load damage or personal injury.
1) Latch the pad frame in the vertical position (see relevant illustration under
“SPECIFICATIONS” on page 4).
2) Make sure the load has enough clearance to rotate without contacting anyone or
anything.
3) Use a control handle on the pad frame to keep the load under control at all times.
4)
4A
Pull the rotation release
lever (circled in fig. 4A)
to disengage the
rotation latch, and
rotate the load as
required.
Unbalanced
load may
rotate unexpectedly
when latch is
disengaged.
5) To stop load motion, let
go of the rotation
release lever and guide
the load to the next
appropriate stop.
Note: Whenever rotation is
not required, keep the
rotation latch engaged, to
prevent load damage or
personal injury.
OPERATION