WOOD'S POWR-GRIP MRT410LDC3, Руководство по эксплуатации

Страница: 20 / 50

MRT4-DC3: #35068 Rev 6.2/2-20 18
Powering up the Lifter
1A
Press the lifter's power button ( , fig. 1A).
The vacuum pump will run for a few seconds,
as a normal function of the Intelli-Grip
®
self-
diagnostics.
The lifter automatically tests the 9-volt battery
for the notification buzzer each time the lifter
is powered up. When this battery runs down,
the LCD screen displays “Replace 9V battery?”
and the buzzer chirps once per minute.
Replace the battery as needed (see
“N
OTIFICATION
B
UZZER
B
ATTERY
R
EPLACEMENT
” on
page 35).
1B
To use the optional Remote Control System, briefly hold the
power button (
, fig. 1B) on the radio transmitter to
activate it.
1
1C
Note: When you hold any button on the transmitter, the
transmission indicator light flashes green if the transmitter is
activated.
Sealing the Pads on the Load
Press the lifter’s “attach” button ( , fig. 1C).
Keep “attach” function
activated throughout lift.
1..... The radio transmitter turns off automatically after a period of inactivity.
OPERATION