Woodpecker i-Scan, Инструкция по эксплуатации

Страница: 23 / 30

23
The imaging plate scanner is intended for use in the electromagnetic
environment specified below. The customer or the user should assure that it
is used in such an environment.
Emission test Compliance Electromagnetic environment-guidance
RF emission
GB 4824
Group 1
The imaging plate scanner uses RF
energy only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference to nearby electronic
equipment.
RF emission GB
4824
Class B
The imaging plate scanner is suitable
for used in all establishments,
including domestic establishments and
establishments directly connected to
the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic emission
GB17625.1
Class A
Voltage fluctuation/
flicker emission
GB17625.2
Complies
10.2 Guidance and manufacturer’s declaration-electromagnetic immunity
Guidance and manufacturer’s declaration-electromagnetic immunity
The imaging plate scanner is intended for use in the electromagnetic
environment specified below. The customer or the user should assure that it
is used in such an environment.
Immunity test Test level
Compliance
level
Electromagnetic
environment - guidance
Electrostatic
discharge GB/
T 17626.2
±6kV contact
±8kV air
±6kV contact
±8kV air
Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the relative
humidity should be at least 30
%.
Electrical fast
transient/burst
GB/T 17626.4
±2kV for
power
supply lines
±1kV for
input/output
lines
±2kV for
power
supply lines
N/A
Mains power quality should be
that of a typical commercial or
hospital environment.