Woodbridge BW5100S, Руководство по установке и эксплуатации

Страница: 16 / 20

R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
R
WOODBRIDGE WOODBRIDGE
WOODBRIDGE WOODBRIDGE
www.woodbridgebath.com
15
R
WOODBRIDGE
2.Low battery
Step II Step I
During the use of the product, wave to sense,
the indicator light of the sensor module slow
flashes 12 times, indicating that the battery is
at low voltage and needs to be replaced.
Unscrew the screws on the back cover and
remove back cover from the control module,
replace batteries and tighten the screws again.
Pay attention to inner box direction when
installing.
Notes:
1.Must be 1.5V “AA” alkaline battery;
2.Different brands, different used and new
batteries cannot be mixed.
3.Battery life will be significantly reduced when
using non-alkaline batteries;
4.When installing the inner box components,
follow the installation direction shown in the
label.
2.Unplug and remove the battery box and
then remove all batteries.
Tips: When using the toilet again, re-connect
the water supply and re-install the
battery box.
When the product is left unused
for long time
Especially in winter when no one at home
for a long time, please drain out the water
inside tank and pipe to prevent freezing.
To discharge water
1. Drain out the water inside tank
Activate flushing, and then turn off angle
valve to prevent water inlet.
3. Drain out the water inside pipe
Unscrew the hose connector off angle
valve, drain the water in the pipe and
reinstall.
4. Handle the remaining water in bowl
It is suggested to put some
antifreeze into water inside
the bowl.
Note
：
Before water discharging,
the power must be cut off!