R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
8
R
WOODBRIDGE
www.woodbridgebath.com
Cardboard 01
INSTALLATION OF CERAMIC TOILET
Precaution before installing
Minimum dynamic working water pressure:
0.09MPa or more (15.0L/min or more),
failure to meet this pressure will not achieve
the best flushing effect.
Remark: Apply the methods below if you
don’t have water pressure testing device.
Draw drain outlet centerline on the floor,
Install angle valve at proper position on
wall according to dimension of toilet.
1. Installation of mating angle valve
Line
Drain outlet
Mating angle valve
2. Cardboard installation
Align cardboard with the centerline of
drain outlet;
Draw contour line according to cardboard;
Angle
valve
Hose
Water storage
barrel
Open the angle valve and connect water inlet
for 10s, once the water volume is above 2.5L,
the minimum water pressure of the product is
ensured.
(can be filled with 5 bottles of 500ml
mineral water bottles)
Cardboard 02
3.Hose
Connect the water inlet and angle valve of the
toilet with the matching hose and tighten it
Angle valve connector
Inlet connector
Flexible hose
2 3/4”
15 3/4”
12”
2 3/4”