Gas Plancha (GEN1)
Service Manual
PG
62
OF
64
M0102.20 JULY 2019
An ongoing program of product improvement may
require us to change specifications without notice.
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
TOLL FREE
800.988.8103
TEL
360.650.1111
FAX
360.650.1166
woodstone-corp.com
ZIP TUBE REMOVAL, v2 & 3
File Location: \\woodstone.net\dfs\CAD\Manuals\M0102\Rev 02\0_Service_Manual-1.dft
REV:
DATE:
PART #:
WS-PL-4836-4-CT00NG
5/13/2015
bena
DWN BY:
SHEET:
PL4836
4 - Zone Gas Plancha
2
12 of 13
7000-1320-R
Zip Tube, .375 OD - Right Side
Zip Tube, .375 OD - Left Side
Zip Tube Removal
NOTE: ONLY QUALIFIED GAS SERVICE PERSONNEL
SHOULD ATTEMPT THIS PROCEDURE!
1.
Remove all (4) burner casette assemblies
2.
Remove (4) 10-32 x 5/8" hex screws.
3.
Reach inside burner access holes and release zip tubes from retaining clips at end.
4.
Lift zip tubes upwards, unseating them from zip tube manifold tube.
5.
Remove through bottom access.
6.
Re-installation: CAUTION: Zip tubes are right and left handed and must have ports
facing towards burners when in place. Failure to follow this procedure may result in
failure of burners to light and create unsafe levels of unburned gas fuel.
9000-0643
Screw, Hex, NoSlot, 10-32 x 5/8", SS
(x4)
PL-4836
VERSION 2 & 3:
POST JUNE 2013
