manualshive.com logo in svg

Wood Stone PHOENIX 3030 WS-PX-3030-RFG, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wood Stone PHOENIX 3030 WS-PX-3030-RFG Скачать руководство пользователя страница 16

Phoenix Installation and Operation Manual

16

ASSEMBLY

An ongoing program of product improvement may require us to change
specifications without notice. 

Phoenix Ovens, 

Revised January 2015.                               Doc no: M0029.04

[email protected]

 

or visit 

woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.
bellingham, wa 98226 usa

t. +1.360.650.1111
f. +1.360.650.1166

3. 

Using a forklift or other suitable lifting device, carefully 
lower the body of the oven on to the stand so that the 
bolt holes line up� While supporting the oven with the 
lift, install the 10 mm x 25 mm (3/8" x 1") carriage 
bolts� Use the washers provided and tighten all nuts 
securely� Be sure to use the forklift pockets when 
lifting the body of the oven� 

4. 

After the oven body is bolted to the stand, the oven can be moved into place with a pallet jack using the LOWER forklift 
pockets� If the oven is to be installed against a wall, leave access to the back of the oven until the assembly is completed�

CAUTION: 

The 3030 model Phoenix weighs approximately 445 kg, the 4343 approximately 953 kg, the 4355 appromimately 

1134 kg and the 4836 appromimately 816 kg. All models are very top-heavy. 

If the oven tips, it can cause severe 

injury or death

! The oven should only be moved in this manner (pallet jack) on a LEVEL FLOOR. Do not attempt to move 

the oven with a hand truck. If the oven must be moved over an inclined surface, a forklift or other suitable means should 
be employed. If the installer does not have the equipment or experience required to move the oven safely, we recommend 
you secure the services of a qualified rigging company.

Make sure the pallet jack 

wheels do not contact the 

underside of the fork pocket 

when lifting to avoid damaging 

the stand.

Never attempt to use a hand 

truck to move the oven.

The oven should only be moved 

using a pallet jack on a LEVEL 

FLOOR. If the oven must be moved 

over an inclined surface, a forklift 

or other suitable means should be 

employed. 

Содержание PHOENIX 3030 WS-PX-3030-RFG






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды