manualshive.com logo in svg

Wood Stone PHOENIX 3030 WS-PX-3030-RFG, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wood Stone PHOENIX 3030 WS-PX-3030-RFG Скачать руководство пользователя страница 11

Phoenix Installation and Operation Manual

11

MOVING THE OVEN

An ongoing program of product improvement may require us to change
specifications without notice. 

Phoenix Ovens, 

Revised January 2015.                               Doc no: M0029.04

[email protected]

 

or visit 

woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.
bellingham, wa 98226 usa

t. +1.360.650.1111
f. +1.360.650.1166

If you received your Phoenix oven disassembled, go to the ASSEMBLY section� 
If you received your Phoenix oven fully assembled, but need to disassemble the oven to move it through a narrow door or passageway, 
go to the DISASSEMBLY section�
If you received your Phoenix oven fully assembled, the oven can be moved into place with a pallet jack using the LOWER forklift 
pockets� If the oven is to be installed against a wall, you may need to leave access to the back of the oven to complete the utility 
connections�

PLACING THE OVEN

The oven must be installed on a flat level surface� The weight of the oven is carried by the full perimeter of the oven stand� If it is 
necessary to shim the oven for leveling purposes, it is critical that the shim material be metal, and that the shims are installed in 
such a way that the full perimeter of the stand is solidly supported� Any gaps created by shimming between the oven and the floor 
must be sealed� 

Failure to solidly support the full perimeter of the oven stand can result in costly damage to the oven and 

will void the warranty. 

The floor design and construction must be adequate to handle the weight of the oven� 

Please see 

woodstone-corp.com/installation_footprints.htm

 

for floor loading information�

FORKLIFT REQUIREMENTS

The oven is very top-heavy� IF THE OVEN TIPS IT CAN CAUSE SEVERE INJURY OR DEATH! NEVER ATTEMPT TO USE A HAND TRUCK 
TO MOVE THE OVEN! The oven should only be moved using a Pallet Jack on a LEVEL FLOOR� If the oven must be moved over an 
inclined surface, a forklift or other suitable means should be employed� If the installer does not have the equipment or experience 
required to move the oven safely, we recommend you secure the services of a qualified rigging company�

Make sure the pallet jack 

wheels do not contact the 

underside of the fork pocket 

when lifting to avoid damaging 

the stand.

Never attempt to use a hand truck 

to move the oven.

The oven should only be moved using a 

pallet jack on a LEVEL FLOOR. If the oven 

must be moved over an inclined surface, 

a forklift or other suitable means should 

be employed. 

Model

Shipping Weight

Required Forklift 

Capacity

Minimum Fork 

Length

PX-3030

499 kg (1,100 lbs)

900 kg (2,000 lbs)

1.2 m (4')

PX-4343

953 kg (2,100 lbs)

1450 kg (3,200 lbs)

1.5 m (5')

PX-4355

1134 kg (2,500 lbs)

1600 kg (3,500 lbs)

1.5 m (5')

PX-4836

816 kg (1,800 lbs)

1450 kg (3,200 lbs)

1.5 m (5')

Содержание PHOENIX 3030 WS-PX-3030-RFG






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды