manualshive.com logo in svg

Wood Stone PHOENIX 3030 WS-PX-3030-RFG, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wood Stone PHOENIX 3030 WS-PX-3030-RFG Скачать руководство пользователя страница 15

Phoenix Installation and Operation Manual

15

ASSEMBLY

An ongoing program of product improvement may require us to change
specifications without notice. 

Phoenix Ovens, 

Revised January 2015.                               Doc no: M0029.04

[email protected]

 

or visit 

woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.
bellingham, wa 98226 usa

t. +1.360.650.1111
f. +1.360.650.1166

Follow these instructions only if the oven was shipped disassembled, or disassembled to move through a narrow door 
or passageway.

The oven must be installed on a flat level surface� The weight of the oven is carried by the full perimeter of the oven stand� If it 
is necessary to shim the oven for leveling purposes, it is critical that the shim material be metal, and that the shims are installed 
in such a way that the full perimeter of the stand is solidly supported� Any gaps created by shimming between the oven and the 
floor must be sealed for proper ventilation� 

Failure to solidly support the full perimeter of the oven stand can result in costly 

damage to the oven and will void the warranty. 

The floor design and construction must be adequate to handle the weight of the oven� 

Please see 

woodstone-corp.com/installation_footprints.htm

 

for floor loading information�

2. 

Use the 9�5 mm x 25 mm (3/8" x 1") carriage 
bolts to assemble the stand� Be sure to use the 
washers provided and to tighten nuts and bolts 
securely�

1.

 

Lay out pieces�

Carriage bolts

9�5 x 25mm (3/8 x 1")

3030 only:

 9�5 x 19mm (3/8 x 3/4") 

On 3030 models only

Use 3/8 x 3/4" (9�5 x 19 mm) long carriage bolts 
instead of the 9�5 x 25 mm (3/8 x 1") long carriage 
bolts�

Содержание PHOENIX 3030 WS-PX-3030-RFG






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды