7
An ongoing program of product improvement may require us to change
specifications without notice.
WS-SSR, Revised March 2015
Doc no: M0058.00
or visit
woodstone-corp.com
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free 800.988.8103
Tel 360.650.1111
Fax 360.650.1166
INSTALLING THE ROTISSERIE DRIVE
To install the Okanogan rotisserie drive on a Wood Stone charbroiler (if ordered together), simply place the unit on the
rails located at the top of the charbroiler and plug it in� Make sure that the unit glides smoothly on the rails, that the power
switch is facing the operator and that the cord and plug are not restricted or in danger of getting too hot�
INSTALLING THE RAIL/SUPPORT ASSEMBLY
To install the Okanogan rotisserie drive as an addition to a previously installed Wood Stone charbroiler, the rail/support
assembly must first be installed� To do so, place the rail assembly on the charbroiler� The rail/support assembly should
seat inside the walls of the charbroiler� Make certain the assembly is positioned as far back as it will go� Drill through the
walls of the charbroiler as indicated by the holes in the rail assembly� Secure the assembly to the charbroiler using the
carriage bolts provided� Then install the rotisserie drive as described above�
Rail/support assembly
Rotisserie drive
Okanogan Single Spit Rotisserie
Installation and Operation Manual
INSTALLATION
