Wood Stone MT. ST. HELENS 26 SERIES, Инструкция по установке и эксплуатации

Страница: 9 / 16

9
An ongoing program of product improvement may require us to change
specifications without notice.
WS-SFB, Revised June 2014.
Doc no: M0059.01
info@woodstone-corp.com or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Mt. St. Helens Solid Fuel Charbroiler
Installation and Operation Manual
INSTALLATION
SACRIFICIAL HEAT SHIELD (ALL MODELS)
FLASHING (COUNTERTOP MODELS)
UNLOADING THE MT. ST. HELENS
Under no circumstances should manual unloading be attempted. If a receiving dock is available, a pallet jack should be
sufficient to remove the crated unit from the delivery truck. The use of a forklift (2,000 lb.) is suggested when moving the
unit from the delivery truck to ground level.
REV:
DATE:
PART #:
WS-SFB-57-CT
General Arrangement
Installation Illustrations
3/7/2013
bena
3
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
1 of 1
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-SFB-CT_Flange_Install_Detail-0.dft
Seal bottom edge of flashing
to counter using high-temp
silicone (provided).
Seal any gap between the flashing and
the charbroiler using the high-temp
silicone (provided).
Using the hardware provided, install the
stainless steel flashing to the front and
back of the charbroiler.
Install Sacrificial Heat
Shield as Shown
Sacrificial Heat Shield
REV:
DATE:
PART #:
WS-SFB-57-CT
General Arrangement
Installation Illustrations
3/7/2013
bena
3
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
1 of 1
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-SFB-CT_Flange_Install_Detail-0.dft
Seal bottom edge of flashing
to counter using high-temp
silicone (provided).
Seal any gap between the flashing and
the charbroiler using the high-temp
silicone (provided).
Using the hardware provided, install the
stainless steel flashing to the front and
back of the charbroiler.
Install Sacrificial Heat
Shield as Shown
Sacrificial Heat Shield