manualshive.com logo in svg

Wood Stone MOUNTAIN Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wood Stone MOUNTAIN Series Скачать руководство пользователя страница 21

 

PG 

21 

OF

 48

M0037.09   SEPTEMBER 2019

Mountain Series CE  

Installation and Operation Manual

VENTING DO’S & DON’TS

VENTING DO'S AND DONT'S

VENTING DO’S AND DON’TS

When installing a Wood Stone Mountain Series oven there are some basic guidelines to follow regarding oven venting that will 
help ensure proper operation and performance of the gas burners on the oven� These guidelines will also help prevent damage 
to the oven's gas and electrical components due to improper venting and installation� Damage caused by improper venting and 
installation is not covered by the oven warranty� This information applies to all Wood Stone Mountain Series (MS) ovens equipped 
with one or more gas burners�
Most Wood Stone Mountain Series ovens are built into some sort of wall structure or enclosure� This creates the potential for 
different venting scenarios that can be detrimental to the operation and performance of the oven burners� Here are some basic 
rules that to follow that will ensure a properly functioning oven installation� Illustrated examples are included on the following 
pages�

RULE 1

The 

ONLY

 pathway for air to enter the space beneath the oven should be at the front of the oven at the perforated opening in the 

oven Service Panel provided with the oven, or on ovens equipped with an optional Storage Box, through the perforations provided 
on the oven Storage Box� This will eliminate the chance of air movement or cross drafts beneath the oven that can disrupt the 
oven burners�

RULE 2

DO NOT

 block the flow of air through the front Service Panel� It is required to provide necessary combustion air to the oven 

burners� Airflow and service access 

MUST

 be provided from the front of the oven only at this Service Panel� 

DO NOT 

relocate the 

oven air intake 

(see Rule 1).

RULE 3

To ensure proper venting of the oven, you must use an appropriate exhaust fan as described in this manual� There must also be 
an adequate source of make-up air provided to your kitchen space—the room that the oven opens into� The make-up air supply 
should not point directly at the oven� Other than the oven Service Panel, do not provide make-up air or other ventilation into an 
enclosure that surrounds the oven 

(see Rule 1).

 Without proper make-up air the oven, (or any gas equipment), will not vent and 

operate correctly� 

Please review the illustrations on the following pages.

Содержание MOUNTAIN Series

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды