Wood-mizer LX450DB-A, Инструкция по безопасности, установке, эксплуатации, обслуживанию и каталог запасных частей, Страница: 12 / 40

Debarker Installation
Harness Installation
2
2-7 DB17doc072219 Debarker Installation
6. Route the black motor wires from the motor and warning light harnesses through one of
the provided rubber boots. Strip the end of the black warning light wire and install a 1/4”
14-16 gauge ring terminal. To install the 14-16 gauge ring terminal, fold the stripped end
of the wire over the insulation, install the ring terminal and crimp in place.
7. Connect the black motor and light wires to the negative (-) motor terminal. Replace the
terminal nut to secure the wires.
IMPORTANT! Make sure that the ring terminals do not
touch the motor body.
8. Route the red motor and light wires through one of the provided rubber boots. Strip the
end of the red warning light wire and install a 1/4” 14-16 gauge ring terminal. To install the
14-16 gauge ring terminal, fold the stripped end of the wire over the insulation, install the
ring terminal and crimp in place.
9. Connect the red motor and light wires to the positive (+) motor terminal. Replace the ter-
minal nut to secure the wires.
IMPORTANT! Make sure that the ring terminals do not
touch the motor body.
10. Slide the rubber boots over the motor terminal posts to protect the connections.
11. Replace all removed covers and guards.