Wood-mizer LT40 AH Series, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 59 / 146

Setup & Operation
Board Return
Setup & Operation HDSdoc030722 2-26
2
See Figure 2-21.
When the blade reaches the end of the log, the arm will drop down to catch the board and drag it
back toward the operator as the saw head is returned.
DANGER! Keep all persons out of the path of returning boards. Failure
to do so will result in serious injury.
Boards may not always return in the same path or location. If a board returns in a manner that does
not allow the sawyer or off-bearer to maintain control, it may be necessary to stop the reverse motion
of the saw head.
When the board return is to be used, a second person is required to remove the board as it is
returned. DO NOT attempt to use the board return feature when sawing alone.
To bypass the board return feature, push the toggle switch on the control panel up.
FIG. 2-21
3H0363