Wood-mizer LT15SA, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 52 / 117

Setup & Operation
Sawmills with gas blade drive engine:
3
3-2 doc022219 Setup & Operation
IMPORTANT! When starting the machine for the first time, check that
main motor rotation direction is as indicated by the arrow located on
the motor body (fan guard). If the rotation direction is incorrect, invert
the phases in the phase inverter in the power socket (electric box).
Setting the phases in the phase inverter correctly will ensure correct
rotation directions of all sawmill motors.
WARNING! If the blade or drive belt breaks, wait until all rotating parts
are completely stopped. Failure to do so may result in serious injury.
DANGER! It is recommended that a 30mA Ground Fault Interrupter
(GFI) be used.
3.1.2 Sawmills with gas blade drive engine:

Set up the sawmill on firm, level ground and level the sawmill. Secure the sawmill to the
ground to prevent moving during operation. A concrete foundation or pads (rated to support
31 T/m
2
at each sawmill foot position) and 16mm anchored bolts are recommended.

It is not allowed to use the sawmill with gas engine indoor. When using this sawmill type
outdoor it is allowed to work without sawdust collection system connected.
We recommend to setup sawmill in the way that operator position be down the wind. It will
separate the operator from sawdust and engine exhaust gases

The sawmill can be operated in temperature range from -15
o
C to 40
o
C only.

The illumination at the operator's position should be at least 300lx.

The sawmill operator’s position is shown below.
!
150189a