Wood-mizer LT15SA, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 14 / 117

Safety
Blade Handling
1
1-2 doc022219 Safety
1.2 Blade Handling
DANGER! Always disengage the blade and shut off the sawmill
engine before changing the blade. Failure to do so will result in serious
injury.
WARNING! Always wear gloves and eye protection when handling
bandsaw blades. Changing blades is safest when done by one person!
Keep all other persons away from area when coiling, carrying or
changing a blade. Failure to do so may result in serious injury.
1.3 Sawmill Setup
WARNING! Do not set up the mill on ground with more than a 10
degree incline. If setup on an incline is necessary, put blocks under
one side of the mill or dig out areas for the legs to keep mill level.
Setting up the mill on an incline could cause it to tip over, resulting in
serious personal injury.
WARNING! Keep all persons out of the path of the saw head while
loading and unloading the sawmill. Failure to do so may result in
serious injury or death.
1.4 Sawmill Operation
IMPORTANT! The sawmill is intended for sawing wood only.
See Section Cutting Capacity
for log size capacities of the machine.
IMPORTANT! The operator of the sawmill should get adequate
training in the operation and adjustment of the machine.
DANGER! Make sure all guards and covers are in place and secured
before operating or towing the sawmill. Failure to do so may result in
serious injury.
DANGER! Be sure the blade housing cover is in place and secured.
Do not open the blade housing when the blade is engaged.
DANGER! Always keep hands away from moving bandsaw blade.
Failure to do so may result in serious injury.
DANGER! Keep all persons out of the path of moving equipment and
logs when operating sawmill or loading and turning logs. Failure to do
so may result in serious injury.
DANGER! Maintain a clean and clear path for all necessary movement
around the mill and lumber stacking areas. Failure to do so may result
in serious injury.
!