Wood-mizer Incline Log Deck Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 35

Wood-mizer Incline Log Deck Скачать руководство пользователя страница 8

Safety Instructions

Check the Equipment Before Operation

1

1-4

MHdoc112315

Safety

Check the Equipment Before Operation

DANGER!

Make sure all guards and covers are in place

and secured before operating the equipment. Failure to do
so may result in serious injury.

Keep Persons Away

DANGER!

Keep all persons out of the path of moving

equipment and lumber when operating the equipment.
Failure to do so may result in serious injury.

DANGER!

Be sure that all persons are away from the

equipment before starting it. Failure to do so may result in
serious injury.

Keep Hands Away

DANGER!

Always keep hands away from moving chain.

Failure to do so may result in serious injury.

DANGER!

Always be aware of and take proper protective

measures against rotating shafts, pulleys, fans, etc.
Always stay a safe distance from rotating members and
make sure that loose clothing or long hair does not engage
rotating members resulting in possible injury.

«
...
6
7
8
9
10
...
»

Содержание Incline Log Deck




































Отзывы:

Нет отзывов