Operation
Machine Setup
2
2-1
SISdoc052814
Operation
SECTION 2 OPERATION
2.1
Machine Setup
1.
Install the blade to the setter. Rest the blade on the inside of the two blade guides and in
between both blade clamps. Center the blade on the setter stand. Position the three
adjustable blade guide supports so they lightly touch the inside of the blade. The adjust-
able guides should lightly support the blade and keep it from wobbling.
2.
Use the blade height knob to adjust the blade height so the bottom of the gullet is aligned
with the top of the blade clamps.
See Figure 2-1.
FIG. 2-1
Blade Height
Adjustment Knob
Pusher Adjustment Knob
SI0006B
Blade Height
Adjustment Knob
Pusher Adjustment Knot
