Wood-mizer 4015X5 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 53

Wood-mizer 4015X5 Скачать руководство пользователя страница 9

Safety

Safety Instructions

Safety

MO01doc091902

1-4

1

KEEP HANDS AWAY

DANGER!

Always keep hands away from moving blades. Failure

to do so will result in serious injury.

DANGER!

Always be aware of and take proper protective mea-

sures against rotating shafts, pulleys, fans, etc. Always stay a safe
distance from rotating members and make sure that loose clothing
or long hair does not engage rotating members resulting in possi-
ble injury.

CHECK MACHINE BEFORE OPERATION

DANGER!

Make sure all guards and covers are in place and

secured before operating the machine. Remove all loose objects
from the machine before operating. Failure to do so may result in
serious injury.

DANGER!

Make sure all adjustable components are tightened

securely and the blades turn freely before starting the machine.
Failure to do so may result in serious injury.

WARNING!

Use the appropriate feed wheel and adjust it properly

for the material being processed.

«
...
7
8
9
10
11
...
»

Содержание 4015X5






















































Отзывы:

Нет отзывов