35
34
Pair the thermostat
1. Either click
Add another device
in the Success screen (A),
or the
+
on the Devices screen (B) to open the Install wizard.
Select
Thermostat
from the list (C).
2. Press the
MODE
button on the front of the thermostat (D)
until OFF is displayed on the screen. Press and hold the space
between the
HOLD
and
FAN
buttons and at the same time,
swipe
a
finger down the right-hand slider. The display will
change to 01.
3. Press the
icon on the slider until the display reads 12, then
press
HOLD
. This enters the ‘Join Network’ menu.
4. Press the
icon again to display 01 and press
HOLD
to pair
with the Wondrwall network, then press
MODE
.
5. Follow the on-screen instructions to configure up the
thermostat (E).
6. When the thermostat has successfully paired, either click
Finish
on the Success screen (F) to end the installation or
Add
another device
to continue pairing the rest of your Wondrwall
devices.
A
B
C
D
F
E
