8
MAINTENANCE
Battery replacement
(See fig 8).
This appliance requires 9V PP3 Ever Ready Silver Seal (or equivalent)
battery.
To replace the battery remove the bottom front cover casting.
Fit the new battery firmly to the connections on the generator, the
positive battery terminal (+) being to the right as you insert.
Regular maintenance
In order to achieve and maintain high levels of personal safety and performance
efficiency, it is essential that the opening at the back of the fire and the flue are kept clear
of any form of obstruction. It is possible that deposits of mortar or soot could fall and
accumulate causing the flue to be blocked or restricted and so preventing proper
clearance of dangerous exhaust fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least every
twelve months by a competent person (In the U.K, a CORGI registered installer).
We recommend that all gas appliances and their flues, wherever situated, are checked
annually.
Servicing
•
In the United Kingdom servicing can be carried out either by a Wonderfire Service
engineer or a CORGI registered installer.
•
If you require your fire to be serviced, please contact the Wonderfire service
department
on
0121 386 6203
and quote the following details;
a) -
model name and number.
b) -
appliance serial no. (To be found below the burner and behind the bottom front
cover)
•
If you wish to replace any of the owner replaceable parts listed below, please contact
your dealer or the Wonderfire service department for your nearest stockist of these
parts. When ordering please quote the part number shown below.
•
In Republic of Ireland call
353 183 75114
for all enquiries.
Description
Part No
Rear wall
545999
Front base coal
9770074
Rear base coal
569459
Pack of 9 top coals
9780033
When fitting replacement parts, follow the instructions contained in this guide. It is
important that only Wonderfire approved parts are used for maximum safety.
Fig. 8. Battery fitting
