OWNER’S GUIDE
Page 12
Figure 14
Figure 13
Figure 12.
Install the 11 loose pebbles as
follows. The underside of each
pebble is marked with a letter ‘A’
to ‘K’ and an arrow.
The pebbles should be positioned
so that the arrows always point
towards the back of the fireplace
opening. When located into
position the stem of each arrow
should be at 90° to the rear of the
fireplace opening (See figure 12).
3.
Hold pebble ‘A’ upright
with the arrow pointing to the top.
Place pebble “A” on top of
the front base pebble. The
pebble should rest against
the moulded pebble to its
left. (See figure 12).
4.
Hold pebble ‘B’
upright with the arrow
pointing to the top. Place
pebble “B” on top of the
front base pebble. (See
figure 13).
5.
Hold pebble ‘C’ upright
with the arrow pointing to the
top. Place pebble “C” on top
of the front base pebble. It
should lie against the moulded
pebble to its left. (See figure
14).
