OWNER’S GUIDE
Page 11
Figure 11. Front Base Pebble
Position
Figure 10 Rear Base Pebble
Position
Figure 9
7.
Place the remaining type “A”
coal between the front and rear base
coals. The letter “A” should be upside
down with its rear face between the
right and centre coals of the rear base
coal. Angle the coal so that the gap
between it and the type “B” coal to its
right is appreciably larger than the gap
between it and the type “A” coal to its left but
do not have it touching the type “A” coal. This
will give the best flame effect. See figure 9.
Fitting Pebbles to models supplied with
Pebble Ceramic Fuel Effect.
(For Coal model see section ‘Fitting coals to
models supplied with Coal Ceramic Fuel
Effect’)
1
.
Place the rear base pebble in the firebox. It
should rest on the ledges at the sides and
back of the firebox and its rear face should
touch the rear ceramic wall. See figure 10.
2
.
Place the front base pebble in the
firebox with its bottom front locating over
the front rim of the firebox. Pull the pebble
forward so that it locates immediately
behind the front rim of the firebox. See
figure 11.
