WT100CR operation manual
1, Touch remote controller battery install
Use AA size battery x 2
Note:
DO NOT
touch the “Touch Area” while placing the battery
2. Functions
of
Touch
PAD
a. move
coursor
touch and move touch-pad by finger
b. simulate mouse left button
a short touch (click)on touch pad
c.
simulate mouse right button
a long touch(no moving approx. 1 second) on touch pad
3. Auto search RF receiver dongle
press and simultaneously until LED off then release keys ,
when you see blue LEDs keep ON, it means that the WT100CR is looking
for the RF dongle; when you see blue LEDs blinking quickly, it means that
both remote controller and RF dongle had been successfully connected!
Note : if you replace WT100CR battery, you have to reconnect RF dongle.
